Loading
Yamaha P3500S
UGX 1,450,000
Standard
Amplifiers
The Yamaha P3500S is a professional 2-channel power amplifier for passive PA systems. It is not a speaker and should not be connected to powered speakers. Its role is to take signal from a mixer, crossover, or processor and provide power to passive tops, floor monitors, full-range cabinets, or moderate subwoofer setups when the speakers are matched correctly.
Price
USh 1,450,000
Select option
Delivery in Kampala usually takes 2 to 4 days.
Pay by MTN MoMo, Airtel Money, or cash on delivery.
What this product does well and why it fits the setup.
The Yamaha P3500S is a professional 2-channel power amplifier for passive PA systems. It is not a speaker and should not be connected to powered speakers. Its role is to take signal from a mixer, crossover, or processor and provide power to passive tops, floor monitors, full-range cabinets, or moderate subwoofer setups when the speakers are matched correctly.
The Yamaha P3500S is a professional 2-channel power amplifier for passive PA systems. It is not a speaker and should not be connected to powered speakers. Its role is to take signal from a mixer, crossover, or processor and provide power to passive tops, floor monitors, full-range cabinets, or moderate subwoofer setups when the speakers are matched correctly.
The P3500S sits in the middle of Yamaha's P-Series. It gives more headroom than the P2500S, while still sitting below the heavier P5000S and P7000S models. That makes it a sensible choice for buyers who need more power for passive tops or monitor systems, but do not necessarily need the largest Yamaha amplifier in the rack.
Yamaha's P-Series was commonly paired with Yamaha Club Series passive loudspeakers, and the P3500S includes Yamaha Speaker Processing, also known as YS Processing. In practical terms, this helps when matching the amplifier to Yamaha-style passive speakers. It can still be used with other passive speakers, but impedance, power rating, and crossover settings must be confirmed first.
The P3500S includes sweepable HPF and LPF processing from 25Hz to 150Hz, which is useful when separating tops and subs or protecting speakers from unnecessary low-frequency energy. These controls are helpful setup tools, not magic. A clean system still depends on correct gain structure, sensible EQ, proper cabling, and speakers that match the amplifier's output.
Yamaha lists stereo and bridged ratings for the P3500S, including dynamic 2-ohm and 4-ohm bridge figures. Those modes should not be treated casually. Low-impedance and bridged setups demand correct speaker ratings, secure cables, stable mains power, working cooling, and a user who understands amplifier loading. For many buyers, normal stereo operation into properly matched 4-ohm or 8-ohm speakers is the safer starting point.
Before this product is published publicly, confirm the exact physical Yamaha P3500S unit. Check the rear-panel voltage, connector layout, fan condition, serial label, mode switches, and output ratings. If the stock item is another Yamaha P-Series model, a locally modified unit, or a mislabelled amplifier, the product page must be corrected before it goes live.
Technical details at a glance.
Brand
Amplifiers
Yamaha
Model
Amplifiers
P3500S
Series
Amplifiers
Yamaha P-Series
Product Type
Amplifiers
Professional 2-channel power amplifier
System Role
Amplifiers
Powers passive tops, monitors, full-range cabinets, and moderate passive subwoofer setups
Technology
Amplifiers
Yamaha EEEngine technology for reduced power consumption and heat generation
Speaker Processing
Amplifiers
Yamaha Speaker Processing / YS Processing for Yamaha Club Series-style speaker matching
Processor Controls
Amplifiers
Sweepable HPF/LPF from 25Hz to 150Hz at 12dB/octave
2Ω Dynamic Power
Amplifiers
1000W x 2, 1kHz 20ms non-clip dynamic power
4Ω Stereo Power
Amplifiers
590W x 2 at 1kHz / 450W x 2 at 20Hz–20kHz depending on voltage model and rating condition
8Ω Stereo Power
Amplifiers
390W x 2 at 1kHz / 350W x 2 at 20Hz–20kHz depending on voltage model and rating condition
4Ω Bridged Dynamic Power
Amplifiers
2000W
8Ω Bridged Power
Amplifiers
1180W at 1kHz on 120V/230V/240V listings; 900W at 20Hz–20kHz listings
THD
Amplifiers
Less than 0.1% at 20Hz–20kHz half power, RL=4Ω
Frequency Response
Amplifiers
+0dB / -1.5dB, 20Hz–50kHz at RL=8Ω
Signal-to-Noise Ratio
Amplifiers
102dB
Damping Factor
Amplifiers
More than 200
Input Connectors
Amplifiers
2 x XLR-3-31 and 2 x 1/4-inch TRS phone jack
Speaker Outputs
Amplifiers
2 x speakON, 2 x 5-way binding post, and 2 x 1/4-inch phone jack
Cooling
Amplifiers
Variable-speed fan cooling
Dimensions
Amplifiers
480mm W x 456mm D x 88mm H / 2U rackmount
Net Weight
Amplifiers
15kg / 33.1lb
Recommended Use
Amplifiers
Passive tops, floor monitors, Yamaha Club Series-style speakers, schools, worship rooms, bars, halls, rehearsal spaces, and mobile PA racks
Setup Requirement
Amplifiers
Confirm speaker impedance, stereo/bridge mode, cabling, ventilation, gain settings, processing controls, and mains voltage before use
Publishing Note
Amplifiers
Confirm physical P3500S unit, voltage, connector version, condition, and rear-panel ratings before public publishing
Final purchase guidance and support information.
Need help before checkout? Talk to the team on WhatsApp for purchase guidance and product confirmation.
