Loading
Female XLR Cables
UGX 55,000
Standard
Cables
Female XLR Cables are treated here as balanced microphone or line-level audio cables using a female 3-pin XLR connector on at least one end. They are common in microphones, stage boxes, mixers, PA systems, church sound, studios, conference rooms, and live event setups.
Price
USh 55,000
Select option
Delivery in Kampala usually takes 2 to 4 days.
Pay by MTN MoMo, Airtel Money, or cash on delivery.
What this product does well and why it fits the setup.
Female XLR Cables are treated here as balanced microphone or line-level audio cables using a female 3-pin XLR connector on at least one end. They are common in microphones, stage boxes, mixers, PA systems, church sound, studios, conference rooms, and live event setups.
Female XLR Cables are treated here as balanced microphone or line-level audio cables using a female 3-pin XLR connector on at least one end. They are common in microphones, stage boxes, mixers, PA systems, church sound, studios, conference rooms, and live event setups.
A normal microphone cable usually has a female XLR end for the microphone and a male XLR end for the mixer or stage box. If the store item is listed as female XLR cable, confirm the other side of the cable before selling because it may be female-to-male, female-to-female, or a special adapter cable.
Balanced XLR cable is useful for reducing hum and electrical noise over longer runs. This matters in churches, event halls, stages, and studios where audio cables may pass near power cables, lighting cables, amplifiers, and other interference sources.
Neutrik’s NC3FXX female XLR connector reference lists a 3-pole female cable connector with latch lock, solder contacts, 3.5mm to 8.0mm cable OD support, and minimum 1000 mating cycles. A good connector helps prevent loose sockets, crackle, poor contact, and cable failure.
A normal female XLR cable is not the right cable for speaker-level amplifier outputs or mains power. It should be used for microphone and line-level signal paths unless a specific system requires and rates it for something else.
Before selling, check the cable length, shielding, solder joints, connector gender, pin wiring, strain relief, and signal quality. Bad wiring or broken shielding can cause hum, weak signal, intermittent sound, or noise when the cable is moved.
Before this product is published publicly, confirm whether the cable is XLR female-to-male, female-to-female, 3-pin DMX, microphone cable, adapter cable, or another format. Confirm cable length, brand, connector brand, shield condition, and clean signal operation.
Technical details at a glance.
Brand
Cables
Unconfirmed — verify physical stock
Connector Reference
Cables
Neutrik NC3FXX female 3-pole XLR cable connector
Catalogue Name
Cables
Female XLR Cables
Product Type
Cables
Balanced XLR audio cable category
Connector Gender
Cables
Female XLR on at least one end; verify other end before publishing
Pin Count
Cables
3-pin XLR reference
Cable OD Support Reference
Cables
3.5mm to 8.0mm on Neutrik NC3FXX reference
Wiring Reference
Cables
Solder contacts on NC3FXX reference
Locking Reference
Cables
Latch lock on NC3FXX reference
Durability Reference
Cables
Minimum 1000 mating cycles on NC3FXX reference
Typical Signal
Cables
Balanced microphone or line-level audio
Typical Use
Cables
Microphones, stage boxes, mixers, PA systems, studios, churches, halls, conferences, and live events
Not Recommended For
Cables
Speaker-level amplifier outputs, mains power, or unsupported special wiring
Publishing Note
Cables
Confirm exact cable length, connector genders, brand, shielding, solder quality, conductor condition, and clean signal before publishing
Final purchase guidance and support information.
Need help before checkout? Talk to the team on WhatsApp for purchase guidance and product confirmation.
